Enlarging Stitches – really HUGE stitches!

I usually rely on Bridging (or double bed drop stitch) to create enlarged stitches across a row – either increasing the stitch size or hand-knitting specific needles back to non-working position. I covered Bridging in my first book and dedicated the entire second book to the subject. I think it is the most important thing to know for opening up the possibilities on any machine!

I demonstrated Bridging in the video that Taunton Press produced to accompany Hand-Manipulated Stitches for Machine Knitters and posted the section on Bridging on my YouTube channel (Susan Guagliumi). If you have my Hand Manipulated Stitches Craftsy class, I explain it there as well.

I have to say that I got a chuckle out of watching the YouTube version the other day when I got to the part where I definitively say “these are the largest stitches you can form on a single bed machine”. Ha! It was just 1989 and although I knew full well that double bed drop stitch would allow me to form enormous stitches, I really hadn’t yet begun experimenting with other options for single bed knitting.

In some earlier posts, I presented some YouTube videos by a Russian knitter named Elena Luneva. She uses a similar method to produce enlarged stitches and loops and I recommend you taking a good look at her work as well.  The more tricks you have at your disposal, the less likely you are to be frustrated by the :limitations” of the machine!

Instead of just hand knitting the needles back to non-working position, I eventually figured out that I could pass the yarn around a gauge of some sort before hand knitting each needle back to the rail. The larger the gauge, the larger the stitches I can form. You have the option of wrapping the yarn around your gauge and then knitting each needle back to working position – or all the way to non-work. You could also wrap the yarn around the gauge twice for each stitch.

In this video, I have used a size 13 wooden knitting needle and a standard desk rules as gauges. There are all kinds of things you can use for a gauge and the size of the gauge also helps determine the size stitches you can make.

You will find that the first few wraps and needles knitted back are awkward to manage. You can use a paper clip or an elastic band to help stabilize the gauge if you want to – I usually find that they get in my way so I struggle through the first few (as I did on the video) until the first few stitches help to stabilize the gauge and make it easier to hold onto.

You will find that the stitches drop more easily and evenly if you have a well-weighted comb inserted in the lower edge of the fabric. Also, try to always wrap the yarn around the gauge the same way each time so none of the final stitches is twisted or crossed.

Believe me, I would not advocate working an entire garment like this, but for occasional rows of a special texture, this method is worth trying. For knitters who work on single bed machines and cannot rely on double bed drop stitch, this method opens up all kinds of possibilities!

 

Single Bed Drop Stitch

My last couple of postings were about Drop Stitch, which is typically worked on a double bed machine. Not all of us, however, have two beds to work with so this short clip shows you how to work drop stitch on a single bed machine. This is a great way to cross cables without strain or to quickly create enlarged stitches for a variety of effects.

What I do first is to temporarily “borrow” a couple needles by transferring their stitches to adjacent needles. The empty needles remain in working position where they cast on in with the next pass of the carriage. When that cast on loop is dropped, it is longer than a simple ladder (yarn passing in front of a non-working needle) would be and provides the extra give you need.

Next, cross the cables and then return the stitches to the borrowed needles and finally, hand knit the needles that were in hold and the stitches just returned to their needles. I never just leave a ladder next to cables because (a) it really doesn’t provide all that much extra give and (2) when the fabric is removed from the machine, the edges of the cable often “spread” into the ladder’s space. I just don’t think it looks very good. Give this method a try and I think you will agree!

One last note, you can also re-form the stitches that you remove and then return to the borrowed needles if you want to include a purl stitch along each side of your cables.