I usually rely on Bridging (or double bed drop stitch) to create enlarged stitches across a row – either increasing the stitch size or hand-knitting specific needles back to non-working position. I covered Bridging in my first book and dedicated the entire second book to the subject. I think it is the most important thing to know for opening up the possibilities on any machine!
I demonstrated Bridging in the video that Taunton Press produced to accompany Hand-Manipulated Stitches for Machine Knitters and posted the section on Bridging on my YouTube channel (Susan Guagliumi). If you have my Hand Manipulated Stitches Craftsy class, I explain it there as well.
I have to say that I got a chuckle out of watching the YouTube version the other day when I got to the part where I definitively say “these are the largest stitches you can form on a single bed machine”. Ha! It was just 1989 and although I knew full well that double bed drop stitch would allow me to form enormous stitches, I really hadn’t yet begun experimenting with other options for single bed knitting.
In some earlier posts, I presented some YouTube videos by a Russian knitter named Elena Luneva. She uses a similar method to produce enlarged stitches and loops and I recommend you taking a good look at her work as well. The more tricks you have at your disposal, the less likely you are to be frustrated by the :limitations” of the machine!
Instead of just hand knitting the needles back to non-working position, I eventually figured out that I could pass the yarn around a gauge of some sort before hand knitting each needle back to the rail. The larger the gauge, the larger the stitches I can form. You have the option of wrapping the yarn around your gauge and then knitting each needle back to working position – or all the way to non-work. You could also wrap the yarn around the gauge twice for each stitch.
In this video, I have used a size 13 wooden knitting needle and a standard desk rules as gauges. There are all kinds of things you can use for a gauge and the size of the gauge also helps determine the size stitches you can make.
You will find that the first few wraps and needles knitted back are awkward to manage. You can use a paper clip or an elastic band to help stabilize the gauge if you want to – I usually find that they get in my way so I struggle through the first few (as I did on the video) until the first few stitches help to stabilize the gauge and make it easier to hold onto.
You will find that the stitches drop more easily and evenly if you have a well-weighted comb inserted in the lower edge of the fabric. Also, try to always wrap the yarn around the gauge the same way each time so none of the final stitches is twisted or crossed.
Believe me, I would not advocate working an entire garment like this, but for occasional rows of a special texture, this method is worth trying. For knitters who work on single bed machines and cannot rely on double bed drop stitch, this method opens up all kinds of possibilities!