I really think that ribbing is often over-used and not always appropriate for the garment in question. I understand that once people invest in a ribber, they want to make use of it, but ribbers are capable of much more interesting things than just bands at hip and cuff. And, surely there are edgings and bands more suitable to delicate lace knitting than an inch and a half of 1 x 1 ribbing. For me, the answer is often the I-Cord Bind Off.
This is a fabulous edging that can be worked on any machine (even simple ones like the LK-150) and it produces a beautiful, hand-crafted edge every time.
You are probably familiar with I-cord knitting, where you set the carriage to knit in one direction and slip in the other (doesn’t matter which is which). The yarn that floats across the back of the 3 (or 4) cord stitches when the carriage slips actually gets absorbed into the other stitches as you pull down on the knitting, forming a perfectly round cord. The float disappears and because its length is absorbed by the other stitches, it is usually a good idea to knit I-cord with a slightly smaller stitch size than you might use for stockinette so that the cord stitches are not big and sloppy.
The I-Cord Bind Off is worked exactly the same way except that all of the garment edge stitches (or the picked up selvage edge) are also on the machine, but in holding position. By transferring the nearest stitch from holding position to the adjacent working needle, one stitch is bound off as you work two passes (1 actual row) of the I-cord.
The cord seems to join the fabric more neatly if it is worked with the right side of the fabric facing you. If the purl side is the right side, you don’t need to do anything. If, However, the knit side is supposed to be the right side, scrap off or use a garter bar and re-hang with the knit side facing you.
You do need to keep moving the 3 (or 4) I-cord stitches over closer to the needles in hold and although most people do this with every transfer, I often do it every two transfers as shown in the tutorial because it is faster.
When working the cord around corners, you might want to make a decrease and then 4 passes of the carriage (2 actual rows) for the last repeat on one edge and the first on the next. This will ensure that the corner doesn’t flatten out.
To work an I-cord edging all around – including the cast-on edge – begin and end on waste yarn so that you can rehang live stitches, rather than a cast-on or bound-off edge. It will be neater and if the yarn is very soft or stretchy, you may also want to double a couple of stitches as you re-hang them to keep the work from spreading sideways.
When picking up side (selvage) edges, try to always pick up either a full stitch (my preference) or a half stitch (if you prefer) throughout. Also, just pick up 3 of every 4 stitches along the edge to make sure you don’t stretch and elongate the edge.
In addition to working a single cord around the edge of a garment, you can work multiple rows of I-cord by picking up and re-hanging the previous I-cord on the needles as I did in the photo at left.
I-cord is also a great way to seam garments (or afghans!) if you re-hang the two garment pieces with their wrong sides together as I did in the beige cardigan at left. Just make sure that both sleeves are rehung the same way because there is a definite right and wrong side to the way the cord adjoins the garment. That is, if you re-hang the first side with the back shoulder first and the front on top of it, make sure the second shoulder is re-hung the same way.